All Recalls

Labeling: Label Error on Declared Strength; Some cartons were incorrectly labeled as 0.125 mg instead of 0.25 mg. The blister strips inside the product carton reflect the correct strength of 0.25 mg.

Defective container: unable to get the solution out of the bottle as the spike of the cap was lodged in the nozzle of the product bottle.

There are two software bug issues with the analyzer. Issue 1: When a dedicated rack is reserved for calibration, after a calibration test has been placed and completed, the same rack may be used to place both a patient order and a calibration order. When a patient sample and a non-barcoded calibrator tube is processed on the rack, the calibration result will be reported as a patient result. Issue 2: calibration with expired calibrator. They both may cause erroneous patient results, but the probability of serious adverse health consequences or death is unlikely.

Mislabeled. The shelf-box labeling (unit of sale) is accurate for the packaged devices, however the inner pouch label may contain information for a different model (catheter length)

A broken fuse inside the laser that was caused by a short circuit at PIN 4 of the DOOR CTRL. This short circuit was caused by a badly positioned cable that made contact with the housing/frame and caused a short circuit and destroyed the fuse in the laser. This caused the shutter to remain in its most recent state; either in an open or closed position. Once the fuse was destroyed the shutter could not be operated.

If temperature management system fails to reach correct target water temperature while device is operating in patient control mode, due to sudden patient temperature changes/interruption in water flow/blockage of air flow by an obstruction or dirty filter, then system may not alert, and alarm absence may lead to hypothermia or hyperthermia, so a software update will be released to correct issue.

If blood culture identification panel is used in conjunction with specific lots of culture media bottles, then false positive Serratia marcescens results may occur, due to an increased level of non-viable organism from serratia marcescens targets in culture media bottles, false positive result may lead to an inappropriate change in patient therapy.

Some lots of Capio SLIM do not consistently catch the suture after activation possibly resulting in a prolonged procedure or additional medical intervention.

Catheters may contain a hole in the catheter tubing, which could result in leakage during the insertion process.

Affected product has an increased risk of postoperative perisprosthetic femoral fracture (PFF). The IFU is being updated to reflect the risk of PFF.

Mislabeled. The shelf-box labeling (unit of sale) is accurate for the packaged devices, however the inner pouch label may contain information for a different model (catheter length)

Some lots of Capio SLIM do not consistently catch the suture after activation possibly resulting in a prolonged procedure or additional medical intervention.

The recalled light-up jelly ring toys violate the mandatory federal battery-operated toy regulation because the rings contain button cell batteries that fit within CPSC's small parts cylinder, and can be easily accessed without requiring the use of a common household tool. When button cell batteries are swallowed, the ingested batteries can cause serious injuries, internal chemical burns and death, posing an ingestion hazard to children.

The fuel supply line can leak gas, posing a fire hazard.

The recalled mattress pads violate the mandatory federal flammability regulation for mattress pads, posing a fire hazard.

The youth ATVs fail to comply with the requirements of the federal mandatory ATV safety standard. The handlebars pose a laceration hazard if the child rider's body or head impacts the handlebars at a high rate of speed. Additionally, the parking brakes fail to hold, posing a collision hazard. The ATVs are also missing the required safety reflectors for vehicles intended for use by children 10 years and older. The 518 CY125ATV-6 model's footguards pose a laceration, contusion, and amputation hazard if the rider's foot enters the rear wheel environment. ATVs that fail to meet these mandatory safety requirements pose a risk of serious injury or death.