Dilators and Holding Clip are being used for a secondary function of neuromonitoring, for which it is not 510(k) cleared.
All Recalls
95,114 total recalls in our database
It was discovered that the silicone potting failed to properly cure after undergoing the prescribed curing possess. The potting material is used to insulate, stabilize and provide a moisture barrier to the TPS MicroDriver main Printed Circuit Board Assembly (PCBA). Inadequate cure of the silicone potting could potentially allow it to leak to the outside of the handpiece or cause an electrical ma
Integra LifeSciences has identified through an internal evaluation that in order to comply with US FDA requirements, certain Camino¿ Intracranial Pressure Monitoring Kits require additional labelling to indicate they are UNSAFE in an MR environment. Only the following Camino¿ Intracranial Pressure Monitoring Kits are affected: 110-4B, 110-4BC, 110-4G, 110-4H, 110-4HC, 110-4L, 110-4LC.
The low density polyethylene (LDPE) bag used to package implants adheres to the highly polished surface of the devices.
Xoran MiniCAT00202
Xoran Technologies
The MiniCAT CT Scanners subject to this notification failed to meet Xoran's specifications for dose rate of 125 ¿ 3 kVp. These 18 complaints received include dose rates both on the high and low end of Xorans specifications.
Complaints for Salmonella strains growing on this medium producing an uncharacteristic white colored colony instead of the expected pale pink to mauve colored colonies. This could potentially lead to Salmonella colonies not being detected.
The low density polyethylene (LDPE) bag used to package implants adheres to the highly polished surface of the devices.
Improper restraints during transportation of the da Vinci system could cause the HRSV Monitor to become loose from its mount.
Edwards Lifesciences is recalling certain lots of EMBOL-X Glide Protection System due to deformation of the cannula tip.
The recall was initiated due to an increased risk of implants breaching the sterile pouches inside the shrink-wrapped box.
Philips received reports from the field that the Flat Panel Detector (FPD) does not always remain securely latched in the stowed position.
HemoCue AB has become aware of a production related problem involving punctured HemoCue Hb 201 Microcuvettes single pack pouches.
The low density polyethylene (LDPE) bag used to package implants adheres to the highly polished surface of the devices.
The low density polyethylene (LDPE) bag used to package implants adheres to the highly polished surface of the devices.
RAPIDPoint¿ 400 Series, RAPIDPoint¿ 500, or RAPIDLab¿ 1200 Series blood gas analyzer, users can inadvertently enter a wrong patient ID on the demographics screen, which ultimately could lead to a misidentification of the sample
A limited number of FDA-cleared instruments for da Vinci Single Site use, Bipolar Maryland and curved needle Driver, were shipped without the correct revision of the user manual which provided added instruction for use of these additional Single Site instruments including indication, warnings and precautions.
RAPIDPoint¿ 400 Series, RAPIDPoint¿ 500, or RAPIDLab¿ 1200 Series blood gas analyzer, users can inadvertently enter a wrong patient ID on the demographics screen, which ultimately could lead to a misidentification of the sample
Potential tears in the pouch of six lots of Vented Spike Adapter Product Code 2C0471
The low density polyethylene (LDPE) bag used to package implants adheres to the highly polished surface of the devices.
RAPIDPoint¿ 400 Series, RAPIDPoint¿ 500, or RAPIDLab¿ 1200 Series blood gas analyzer, users can inadvertently enter a wrong patient ID on the demographics screen, which ultimately could lead to a misidentification of the sample