Covidien Endo Clinch II Auto Suture Grasper, 5mm REF: 174317 The Covidien Endo Clinch" II Auto Suture" grasper 5mm has a 5 mm diameter, rotating, insulated shaft approximately 31 cm in length and is designed for introduction and use through the appropriately sized Covidien" trocar sleeve or larger sized sleeve with the use of a converter. The atraumatic jaws are clamped and locked onto tissue structures by closing the handles
Class I - DangerousWhat Should You Do?
- Check if you have this product: Lot Numbers: P8D1333PRX P8D1334PRX P8D1614PRX P8D1615PRX P8D1616PRX P8E1143PRX P8E1189PRX P8E1269PRX P8E1271PRX P8E1272PRX P8F0008PRX P8F1238PRX P8F1239PRX P8F1307PRX P8F1448PRX P8F1452PRX P8F1480PRX P8F1545PRX
- Do not eat it: Even if it looks and smells fine, do not consume this product.
- Throw it away or return it: You can return the product to the store for a full refund.
- Seek medical attention if needed: If you've consumed this product and feel unwell, contact your doctor immediately.
- Report problems: Report any issues to the FDA's Safety Reporting Portal.
⚠️ Emergency: If you experience severe symptoms after consuming this product, call 911 or Poison Control at 1-800-222-1222.
Recall Details
- Company:
- COVIDIEN LLC
- Reason for Recall:
- Sterilization method used was not consistent with the labeling and the approved sterilization method
- Classification:
- Class I - Dangerous
Dangerous or defective products that predictably could cause serious health problems or death.
- Status:
- terminated
Product Information
Full Description:
Covidien Endo Clinch II Auto Suture Grasper, 5mm REF: 174317 The Covidien Endo Clinch" II Auto Suture" grasper 5mm has a 5 mm diameter, rotating, insulated shaft approximately 31 cm in length and is designed for introduction and use through the appropriately sized Covidien" trocar sleeve or larger sized sleeve with the use of a converter. The atraumatic jaws are clamped and locked onto tissue structures by closing the handles
Product Codes/Lot Numbers:
Lot Numbers: P8D1333PRX P8D1334PRX P8D1614PRX P8D1615PRX P8D1616PRX P8E1143PRX P8E1189PRX P8E1269PRX P8E1271PRX P8E1272PRX P8F0008PRX P8F1238PRX P8F1239PRX P8F1307PRX P8F1448PRX P8F1452PRX P8F1480PRX P8F1545PRX
Official Source
Always verify recall information with the official FDA source:
View on FDA.govFDA Recall Number: Z-1211-2019
Related Recalls
A manufacturing issue could lead to a malformed cover tube press which can lead to internal components' movement during firing - leading to the potential for uncontrolled motion.
A manufacturing issue could lead to a malformed cover tube press which can lead to internal components' movement during firing - leading to the potential for uncontrolled motion.
Bedside SpO2 Patient Monitoring System alarms not heard/recognized, resulting in: treatment delay, lack of low oxygen saturation response, respiratory failure, arrhythmia. Highlighting operator's manual: 1)For patient Safety don't silence/decrease alarm volume, 2)Sensor off alarm (no perfusion detected) is low priority alarm, 3)Set monitors to Homecare Mode outside of hospital/professional setting