๐Ÿฅ

Medical Devices Recalls

Medical equipment, implants, and diagnostic devices

38,779 Total Recalls

Increase in the failure rate of certain low-voltage DC power supplies (DCPS)

Jul 7, 2016 Other Medical Devices Nationwide View Details โ†’

If an exposure is aborted during a stereo biopsy workflow, an error may occur which would prevent the system from continuing to operate properly.

Jun 9, 2016 Other Medical Devices View Details โ†’

Field failures were reported related to the da Vinci Xi Surgical System EndoWrist Stapler 45 and 30 instruments having an interruption in shaft rotation and / or instrument jaws not opening.

Jul 14, 2016 Surgical Instruments Nationwide View Details โ†’

Through an error, the labeling failed to include the symbol or other text indicating that the diamond coated tips were single use only. A contributing factor to this error is that in other markets such as Japan, the diamond coated tips are multiple use and are not limited to single use only. The tips are stainless steel with a coating of fine diamond powder. The tips are sold non-sterile and are to be sterilized prior to first use. The tips were cleared as single use only. This problem was discovered during an ongoing, proactive, quality system improvement plan that was initiated by Nakanishi in October 2014. Because the correct instructions for sterilization are not available, it is possible that the devices might not be sterile prior to use. The absence of the single use statement introduces a risk of cross-contamination if the tips are reprocessed and reused.

Jul 8, 2016 Implants & Prosthetics Nationwide View Details โ†’

Field failures were reported related to the da Vinci Xi Surgical System EndoWrist Stapler 45 and 30 instruments having an interruption in shaft rotation and / or instrument jaws not opening.

Jul 14, 2016 Surgical Instruments Nationwide View Details โ†’

WaisMed received a report in which during the operation of the NIO-A, the needle was not released from the device as expected. The device was placed on the floor and after several minutes the needle was released spontaneously. NIO-A and the NIO-P models have the same activation mechanism. However, none of the affected lots of the NIO-A are distributed in the US, and thus the company is only recalling a single lot of NIO-P in the US.

Aug 18, 2016 Surgical Instruments View Details โ†’

The ULTRASERT Delivery System from certain lots have an inferior surface characteristic that could result in the IOL becoming lodged in the Delivery System

Jul 28, 2016 Implants & Prosthetics View Details โ†’

Philips DuraDiagnost stationary X-ray system

Philips Electronics North America

Class I - Dangerous

Buttons or keys on the monitor allow the user to turn the volume setting down to 0", in which case the beep will not be heard at the conclusion of an exposure, as required 21 CFR 1020.31(j), and the Height-Adjustable Tabletop is missing the required labels [21 CFR 1010.2., 21 CFR 1010.3(a), and 21 CFR 1020.30(3)].

Sep 17, 2015 Other Medical Devices View Details โ†’

Alere San Diego is initiating a voluntary recall for the Alere INRatioยฟ/INRatioยฟ2 PT/INR Monitoring Systems (Test Strips and Meters). This action is being initiated as a result of patients who had a therapeutic or near-therapeutic INR with the Alere INRatioยฟ/INRatioยฟ2 PT/INR Monitoring System but a significantly higher INR (outside of therapeutic range) when performed by a central laboratory.

Jul 11, 2016 Diagnostic Equipment Nationwide View Details โ†’

Vision RT Ltd received three (3) reports from different sites that discovered the following issue, unintended changes were made to planned couch parameters, specifically the couch rotation parameter, during patient set-up for the Optical Surface Monitoring System [OSMS]. 1. CRM 3194, No Serious Injury, No MDR, Aware date: Dec 11, 2015 2. CRM 3321, No Patient Involved, No MDR, Aware date: Jan 19, 2016 3. CRM 4570, No Serious Injury, No MDR, Aware date: March 15, 2016 No patient harm was reported in any of these cases.

Jun 30, 2016 Infusion Pumps View Details โ†’

After upgrading to 3.6.7 software version via FCO72800643, during reconstruction of gated helical scans, the planned anatomy can be cut off on the CT images. This issue can occur on gated CT helical reconstruction that is not planned at iso-center (0,0). If the region of interest is not visualized in the images, a CT rescan may be performed.

Jul 20, 2016 Other Medical Devices Nationwide View Details โ†’