Devices labeled for an intended use was not included in the existing 510(k) or PMA, in that, the Indications for use was modified.
All Recalls
95,123 total recalls in our database
During two separate occasions an impactor plate on the handle broke off while being struck by a mallet.
Intuitive Surgical is implementing a voluntary Field Action to implement a modified inspection process for the 5 mm Cannula (PN 420011) and 5 mm Flared Cannula (PN 420262).
Holes and/or tears can be introduced in the FLEXSTENTΒΏ inner pouch under some conditions, and to a lesser degree, in the outer pouch.
Biomet is recalling Active Articulation E1 Hip Bearing implants. Biomet has initiated this action following an investigation which identified that outer label indicates two conflicting O.D. sizes while the inner labels indicate an incorrect O.D. size. The implant itself is etched with the correct O.D. size.
I-Flow initiated two voluntary product removals of the ON-Q Pain Relief System: T-Block Needle/Catheter Tray and T-Block Needle/Catheter Kit because they may have potentially malfunctioned.
ADVIA Centaur iPTH Calibrator 2 pk; REF 10492394. For in vitro diagnostic use in calibrating Intact PTH assays.
Siemens Healthcare Diagnostics
iPTH Assay- reagent and calibrator lots may have demonstrated higher than anticipated variability
Seals may disengage from the cannula which may result in a component inadvertently disengaging into the patients cavity
An LPC Fine Mesh Cassette failed to stay closed during processing operations.
An EZ Wider bed (capacity of 1000 lb. safe working load collapsed during patient use, leaving the patient in a forward tilt position.
ADVIA CentaurΒΏ iPTH ReadyPack Assay 100 Tests; REF 10492368. For in vitro diagnostic use in the quantitative determination of intact parathyroid hormone (iPTH).
Siemens Healthcare Diagnostics
iPTH Assay- reagent and calibrator lots may have demonstrated higher than anticipated variability
Symbios Medical Products, Indianapolis, Indiana, is performing a voluntary recall of all GoPumps found in the GoPump Rapid Recovery System kits and all GoBlock kits manufactured with flow control components assembled prior to July 2012. The recall is being expanded after receiving additional reports relating to excessively high flow rates on the 150 mL reservoir, 2 mL/hr GOPump (PN510031), and the
Symbios Medical Products, Indianapolis, Indiana, is performing a voluntary recall of all GoPumps found in the GoPump Rapid Recovery System kits and all GoBlock kits manufactured with flow control components assembled prior to July 2012. The recall is being expanded after receiving additional reports relating to excessively high flow rates on the 150 mL reservoir, 2 mL/hr GOPump (PN510031), and the
Symbios Medical Products, Indianapolis, Indiana, is performing a voluntary recall of all GoPumps found in the GoPump Rapid Recovery System kits and all GoBlock kits manufactured with flow control components assembled prior to July 2012. The recall is being expanded after receiving additional reports relating to excessively high flow rates on the 150 mL reservoir, 2 mL/hr GOPump (PN510031), and the
Symbios Medical Products, Indianapolis, Indiana, is performing a voluntary recall of all GoPumps found in the GoPump Rapid Recovery System kits and all GoBlock kits manufactured with flow control components assembled prior to July 2012. The recall is being expanded after receiving additional reports relating to excessively high flow rates on the 150 mL reservoir, 2 mL/hr GOPump (PN510031), and the
Plastic bottle containing 10.5 mL of IgM Conjugate Product Usage: Product is a used as a counterstain for various indirect fluorescent assay kits
Bion Enterprises
Affected products have a labeled expiration date of one year too long.
Based on an accelerated aging test for this product packaging, there is an indicator of potential for a breach in the sterile barrier in the header bag and potentially the blue sterilization wrap for togas within the second and third year of shelf life. The test method used involved high heat to accelerate the aging of the packaging. Stryker is conducting additional testing and assessing this pr
Recent Lab testing conducted in March 2013 indicates that the product does not meet the standard of "Differential Pressure of only 1.6 Delta P (mm H2O/cm2)" as indicated on the box/package of the product; and also product manufactured between 2008 - 2012 cannot be guaranteed as Fluid Resistant.
The firm received complaints for unintended movements.
Symbios Medical Products, Indianapolis, Indiana, is performing a voluntary recall of all GoPumps found in the GoPump Rapid Recovery System kits and all GoBlock kits manufactured with flow control components assembled prior to July 2012. The recall is being expanded after receiving additional reports relating to excessively high flow rates on the 150 mL reservoir, 2 mL/hr GOPump (PN510031), and the