Review of on-system electronic product labeling and Instructions for comply with applicable Use in response to a customer inquiry uncovered gaps in compliance FDA standards with the requirements for information to be provided to users in 21CFR 1020.30(h)
All Recalls
95,114 total recalls in our database
Punch Hair Matic A surgical hair transplant device designed for automation of follicular transplantation.
MEDICAMAT S.A.
Medicamat is initiating a field correction due to misbranded marketing literature for the Punch Hair Matic SAFER.
GE Healthcare has recently become aware of a potential safety issue with the Solar 8000M/i Patient Monitor Automatic-View-On-Alarm (AVOA) feature. The Solar 8000M/i AVOA feature will stop functioning if the patient monitor is discharged from the CIC Central Station while a remote automatic bedside alarm view is currently being displayed on the Solar. Once this issue occurs, subsequent remote AV
MEDITECH Microbiology - Calculator/data processing module, for clinical use.
Medical Information Technology
Potential for patient results being removed from LAB/EMR.
Several lots of the LifeShield Latex-Free HEMA Y-Type Blood Set IV Administration Set were assembled incorrectly.
WalkMed Infusion is initiaing a recall on their Triton FP Infusion Pump, Part Number 400000 due to the label on the right side of the pump containing an incorrect instruction.
Prevena Incisional Management System Kit/Dressing Connector - the male connector on the tubing is difficult to connect to the female connector on the Prevena canister tubing
During the treatment table, gantry, and collimator calibration procedures, it is possible to type incorrect values or invert a value.
As the result of a complaint to Heraeus Kulzer's customer service department, Heraues Kulzer is recalling Benco Tartar and Stain Solution part #1010-451, lot #13121434 because it has incorrect labeling on the immediate container. While the outer carton correctly states "Benco Tartar and Stain", the immediate gallon container in which the solution is contained incorrectly states "Benco Temporary C
During the treatment table, gantry, and collimator calibration procedures, it is possible to type incorrect values or invert a value.
Customers are resetting the default values outside recommended factory settings.
AMO TECNIS CL Foldable Silicone IOL with OptiEdge Design, Model Z9002, diopter size: 16.0 and 21.0. Indicated for primary implantation for the visual correction of aphakia in adult patients.
AMO Puerto Rico Manufacturing
Certain Silicone TECNIS IOLs may be labeled with the incorrect diopter power.
Prevena Incisional Management System Kit/Dressing Connector - the male connector on the tubing is difficult to connect to the female connector on the Prevena canister tubing
Greatbatch Medical has initiated a global Field Corrective Action for the Standard Offset Cup Impactor since the product was first released in 2004. Greatbatch has identified through internal Sterility Assurance Level validation testing that a sterility assurance level of 10-6 is not achieved on the Standard Offset Cup Impactor when it is subjected to the steam sterilization cycles and associated dry times that are specified in the current Instructions For Use (IFU) provided with the device. The Standard Offset Cup Impactor is provided non-sterile and must be sterilized prior to use in a surgery. Greatbatch has not received any reports of deaths, illnesses, injuries, or other adverse effects associated with this issue.
Focus Diagnostics initiated the recall of the certain Simplexa Flu AlB & RSV Direct assay kits due to the potential of false positive Flu A, Flu B and RSV signals.
Accessory shorts for the AlterG Anti-Gravity treadmill. Use with the AlterG Anti-Gravity Treadmill for rehabilitation.
AlterG, Incorporated
Unapproved material used by vendor in subset of shorts causing them to stretch more than usual and are uncomfortable for patient.
Prevena Incisional Management System Kit/Dressing Connector - the male connector on the tubing is difficult to connect to the female connector on the Prevena canister tubing
When performing a secondary capture generated from GSI Viewer, the header information is correct on the images. However, when changing the ROI (region of interest) and zooming in, the DICOM header does not change to reflect the new image, thus the line measurements may be inaccurate.
Internal testing revealed a potentially defective component on the power management board that could affect the function of certain Trilogy Ventilators resulting in loss of therapy to patients.
There was an occurrence where the patient case data did not match the patient data when the case was recalled in the Anesthesia Care Record (ACR) in that it included data from another case.