95,075 total recalls in our database
Disposable set may leak during priming from a female quick connector due to a crack in the female quick connector, may lead to a potential delay in treatment since the set will need to be replaced by another set
PHILIPS MEDICAL SYSTEMS NEDERLAND B.V.
Potential safety issue with the AD7 and AD7X patient tables (both tilt and non-tilt versions) part of the Philips Allura and Azurion systems. During manual repositioning of the patient tabletop, a finger can get entrapped between the longitudinal guiding rails and the tabletop. This may result in an injury of the finger, applicable for operators and service personnel
PHILIPS MEDICAL SYSTEMS NEDERLAND B.V.
Potential safety issue with the AD7 and AD7X patient tables (both tilt and non-tilt versions) part of the Philips Allura and Azurion systems. During manual repositioning of the patient tabletop, a finger can get entrapped between the longitudinal guiding rails and the tabletop. This may result in an injury of the finger, applicable for operators and service personnel
Due to manufacturing issue (unintended by-product of the injection molding process) a sharp pin that may puncture the blister packaging and breaching the sterile barrier of the finished product.
Due to nasal spray stability failure for bioburden.
PHILIPS MEDICAL SYSTEMS NEDERLAND B.V.
Potential safety issue with the AD7 and AD7X patient tables (both tilt and non-tilt versions) part of the Philips Allura and Azurion systems. During manual repositioning of the patient tabletop, a finger can get entrapped between the longitudinal guiding rails and the tabletop. This may result in an injury of the finger, applicable for operators and service personnel
GE Medical Systems
The user can continue to take the next exposure after reaching the Automatic Exposure Control (AEC) limit, without taking any further actions to acknowledge or adjust exposure techniques. In all cases, a message still appears on the screen when the AEC limit is reached.
DDS Lab
Certain definitive dental implant restoration cases may have included a temporary titanium abutment (cylinder), rather than a definitive titanium abutment, which may lead the titanium abutment fracture, which may risk loosening of the affixed restoration; fragments could also injure oral mucosa, and could be aspirated.
Philips North America
Potential failure to alarm for "No Device Data" INOP. The device to alarm after a Hamilton ventilator is disconnected from the EC10 Module or IntelliBridge I/O board.
PHILIPS MEDICAL SYSTEMS NEDERLAND B.V.
Potential safety issue with the AD7 and AD7X patient tables (both tilt and non-tilt versions) part of the Philips Allura and Azurion systems. During manual repositioning of the patient tabletop, a finger can get entrapped between the longitudinal guiding rails and the tabletop. This may result in an injury of the finger, applicable for operators and service personnel
Sutures may have an open seal on the primary packaging, due to a manufacturing issue on a specific machine, and if issue is undetected could lead to breach in sterility, could introduce pathogens to the patient and cause infection.
PHILIPS MEDICAL SYSTEMS NEDERLAND B.V.
Potential safety issue with the AD7 and AD7X patient tables (both tilt and non-tilt versions) part of the Philips Allura and Azurion systems. During manual repositioning of the patient tabletop, a finger can get entrapped between the longitudinal guiding rails and the tabletop. This may result in an injury of the finger, applicable for operators and service personnel
Physio-Control
Product shipped with incorrect IFU. IFU does not include proper cleaning/disinfection instructions
Sysmex was made aware of a report of false results due to carry-over caused by the sporadic omission of the probe wash step during antibody pipetting on the PS-10 Sample Preparation System.
Ariens Company, of Brillion, Wisconsin
The recalled snow thrower impeller and auger assembly can continue rotating even after the operator control lever is released, posing a laceration hazard if a user makes contact with the rotating parts inside the housing enclosure at the front of the machine.
Doosan Bobcat North America, of West Fargo, North Dakota
The recalled mower decks cannot be secured in the upright or tilted position by the locking pins during maintenance or service, posing a crush hazard.
Unknown Manufacturer
The lithium-ion batteries in the recalled microphones can overcharge and ignite, posing a fire hazard.
LG Electronics Inc., of South Korea
Front-mounted knobs on the recalled ranges can be activated by accidental contact by humans or pets, posing a fire hazard.
Unknown Manufacturer
The recalled products violate the mandatory federal regulations for consumer products containing button cell or coin batteries, because the sliding doors' sensor panel and the windows' remote control have button cell batteries that can be easily accessed by children. This poses an ingestion hazard. In addition, the recalled products do not have the required warnings. When button cell batteries are swallowed, the ingested batteries can cause serious injuries, internal chemical burns, and death.
Unknown Manufacturer
The recalled sling carriers violate the federal safety regulations for sling carriers, including requirements for structural integrity and occupant retention, posing a fall hazard to babies.