95,102 total recalls in our database
Teleflex Medical
Due to reports of the plastic coating of the stylet splitting and/or breaking off of the stylet.
When performing head or neck scans, the currently displayed SAR values could be lower than the actual SAR in the head as predicted by SAR modeling. The predicted HEAD SAR value from the modeling suggests the actual SAR in the head could exceed IEC60601-2-33 limit of 3.2 W/kg for some scans.
When the system is driving over a non-conductive floor and then over a conductive, grounded part, proper control of the drive behavior may not be possible. The system can be stopped by releasing the drive handle or by pressing the emergency switch. Proper behavior is re-enabled when the system is rebooted.
Focus Diagnostics
Focus Diagnostics is recalling the Anaplasma phagocytophilum IFA IgM kit because of the potential increase in invalid results.
When performing head or neck scans, the currently displayed SAR values could be lower than the actual SAR in the head as predicted by SAR modeling. The predicted HEAD SAR value from the modeling suggests the actual SAR in the head could exceed IEC60601-2-33 limit of 3.2 W/kg for some scans.
The products have been identified to have incorrect size prints on the MILEX PESSARY KIT packaging. While the Pessary pouch is marked with correct size, an incorrect label on the packaging does not meet the required release specification.
The RASH3N, a hexed, abutment screw driver tip has been labeled and distributed as RASQ3N, a square, abutment screw driver tip. Additionally, the RASQ3N received the RASH3N's laser marking "RASH3N" during manufacturing.
Utah Medical is conducting a recall of Myelo-Nate CSF Sampling Kit due to an internal post-sterilization inspection that found a sterile finished tray where the seal between the Tyvek lid and the PETG tray on one side of the tray had been compromised.
RASQ3N, a square, abutment screw driver tip has been labeled and distributed as RASH3N, a hexed, abutment screw driver tip. Additionally, the RASQ3N received the RASH3N's laser marking "RASH3N" during manufacturing.
Tekia is recalling the Single Piece Hydrophillic Acrylic Intraocular Lenses (IOLs) because they may be labeled with the incorrect diopter power.
Unknown Manufacturer
The bicycle fork can crack or break, posing a fall hazard.
Shanghai Freeart Trading Co. Ltd., of China
The glass fish bowls can crack, shatter or break during normal handling, posing a laceration hazard to consumers.
Unknown Manufacturer
The glass bowl can crack, shatter or break during normal handling, posing a laceration hazard.
Unknown Manufacturer
The chair can tip backwards while rocking, posing a fall hazard to the user.
Unknown Manufacturer
The wax warmers can produce high flames, posing fire and burn hazards to consumers.
Hai Xin Technology (Shenzhen) Co. Ltd., Shenzhen, China
The blender poses a laceration risk if consumers pour or invert the pitcher after removing the lid while the loose stacked blade assembly is still inside the pitcher.
Unknown Manufacturer
Fuel lines can break or leak, posing a fire hazard.
Unknown Manufacturer
Batteries can overheat and vent flames, posing fire and burn hazards.
STIHL Inc., of Virginia Beach, Va.
The gasoline tank vent can become dislodged due to incorrect factory installation and cause fuel to leak, posing a fire hazard.
Unknown Manufacturer
The Adapter Kit can overheat posing a risk of fire, and the plastic shell of the adapter can open exposing a risk of shock to consumers.