All Recalls

The system may duplicate sample requests leading to sample misidentification when connected to a Laboratory Information System (LIS)

The patient labels included in the BMAC system procedure packs, catalog numbers 51416 and 51423, are printed with an incorrect lot number, catalog number, and expiry date; the lot number on the procedure pack box label is correct. The expiration noted was not beyond initiation date of the recall. Since the product is noted as sterile, the clearance for K103340, K052925 and K991430 raises question if product was cleared with a sterility claim. Further post-market follow-up will be required to assess the safety risk of the product.

The label outside the cardboard box is labeled correctly but the pouches inside of some of the boxes were mislabeled as a different product.

The Broad Quantification option of the Symbia product software version VB20A may not allow modification of two data input values. The failure occurs when the system with the Broad Quantification option is calibrated with phantoms that do not have a volume of 6500ml and/or when residual dose needs to be entered.

The Legion Screw-on Wedge Size 4 contained 5MM screws instead of the required 10MM screw.

The patient labels included in the BMAC system procedure packs, catalog numbers 51416 and 51423, are printed with an incorrect lot number, catalog number, and expiry date; the lot number on the procedure pack box label is correct. The expiration noted was not beyond initiation date of the recall. Since the product is noted as sterile, the clearance for K103340, K052925 and K991430 raises question if product was cleared with a sterility claim. Further post-market follow-up will be required to assess the safety risk of the product.

(1) Under certain conditions, if a malfunction alarm occurs while the pump is in the "Paused" state waiting for the distal pressure to decrease, the pump cannot be turned off and delivery cannot be restarted until the battery is discharged or is disconnected; and (2) when the user accesses the Preventive Maintenance Screen in Service/Biomed Mode with a Total Delivery Time >1,500 hours, the user will not be able to interact with the device and the device must be power cycled.

Possible break in the connector of the Force Sensor.

Potential failure of the optical distance sensor due to cable disconnection.

The recalled chests and dressers are unstable if they are not properly anchored to the wall, posing serious tip-over and entrapment hazards that can result in injuries or death to children.

The carabiner can break while in use, posing a risk of injury or death to the user.

The winch solenoid located under the operator seat can overheat, posing a fire hazard.

The crossbows can fire or discharge unexpectedly, posing an injury hazard to the user and to bystanders.

CFIA sampled one salad product which resulted in a positive result for Listeria monocytogenes.

Date coding ink was being printed directly on the food contact surface of packaging, allowing the ink to be in direct contact with the product. The ink is not approved for food use.

CFIA sampled one salad product which resulted in a positive result for Listeria monocytogenes.