The firm is initiating a voluntary removal of certain spinal cord stimulation leads, lead extensions, adapters, and deep brain stimulation lead extensions due to the "use by date" displayed on the label which is later than the correct "use by date". No adverse health consequence is expected to occur from this issue.
All Recalls
95,114 total recalls in our database
Kangaroo 924 Safety Screw Spike Set, Product Code 775759
Cardinal Health
🏥 Medical Devices Class I - Dangerous
The feeding spike sets may leak at the interface of the tube and spike connector.
🏥 Medical Devices Class I - Dangerous
The firm is initiating a voluntary removal of certain spinal cord stimulation leads, lead extensions, adapters, and deep brain stimulation lead extensions due to the "use by date" displayed on the label which is later than the correct "use by date". No adverse health consequence is expected to occur from this issue.
Potential presence of elevated endotoxin levels that exceed the specification limit
🏥 Medical Devices Class I - Dangerous
The analyzers fail on S7950 (Range +) QC measurements due to the hemolyzer cuvettes, a subcomponent of the optical system which measures ctHb and derivates. In a cuvette with light shunt, some of the received light has not been transmitted through the sample. This will lead to a perturbed and non-linear absorbance spectrum which results in measurement errors.
VACUETTE Blood Transfer Unit. Lot no. A19024NX. Expiration date: 2022-02-07 - Product Usage: The Blood Transfer Unit is used to transfer blood from a syringe into the evacuated blood collection tube.
C.A. Greiner & Sohne Gesellschaftmbh
🏥 Medical Devices Class I - Dangerous
While transferring blood the needle may dislodged and remain in the tube stopper which may cause needle stick injury or blood leakage.
🏥 Medical Devices Class I - Dangerous
Potential presence of elevated endotoxin levels that exceed the specification limit
🏥 Medical Devices Class I - Dangerous
Electrolyte reference reagent, used for clinical laboratory testing to determine CO2 in human serum or plasma for diagnosis and treatment of potentially serious disorders associated with changes in the body acid-base balance, has a low pH and may cause CO2 calibration failures, high CO2 quality control recoveries, and false high patient results which can lead to delay in treatment.
Clip Applier Kit, REF: K2887, UDI: (01)30607915139132(17)220822(30)1(10)
Applied Medical Resources
🏥 Medical Devices Class I - Dangerous
There may be a slightly protruding rivet on the distal end of the laparoscopic grasper which has the potential for tissue to catch on it during use and lead to tissue damage.
The identified problem is an erroneous association between the carrier and the sample tube caused by a communication error between the firmware of the Interface Modules and the Automation software. This problem can occur only when one of these Interface Modules is put off-line after a carrier in their secondary lane is physically returned on the main track and then put back on-line when the carrier is used to transport another tube.
🏥 Medical Devices Class I - Dangerous
There is a potential for thrombus formation on balloons prepped and staged in the vasculature for long durations. All users, such as those performing lead extraction cases may not be aware of this risk. It was determined that current labeling is insufficient to ensure all potential users minimize the time the balloon remains in vasculature. If left in too long it could lead to embolization.
🏥 Medical Devices Class I - Dangerous
The firm discovered a potential manufacturing deviation of the yoke of the Body Weight Support (BWS) Light that in rare occasions may result in the yoke detaching from the cable guide.
🏥 Medical Devices Class I - Dangerous
Potential presence of elevated endotoxin levels that exceed the specification limit
Potential presence of elevated endotoxin levels that exceed the specification limit
Potential presence of elevated endotoxin levels that exceed the specification limit
Epix latis GRASPER, 5 mm x 35 cm, REF C4130, Qty: 10, Sterile R, CE, Rx ONLY, UDI: (01)00607915110147
Applied Medical Resources
🏥 Medical Devices Class I - Dangerous
There may be a slightly protruding rivet on the distal end of the laparoscopic grasper which has the potential for tissue to catch on it during use and lead to tissue damage.
🏥 Medical Devices Class I - Dangerous
Potential presence of elevated endotoxin levels that exceed the specification limit
Nikon Metrology XTH cabinet x-ray Systems which includes variations STH225, XTH225ST, and MCT225.
Nikon Metrology
🏥 Medical Devices Class I - Dangerous
The manufacturer identified a risk that their products might fail to comply with the cabinet x-ray system performance standard limit on x-ray emissions [21 CFR 1020.40(c)(1)] due to an insufficient safety margin for the means of attachment of a piece of interior x-ray shielding. Double sided industrial tape was used for attachment - there have been only 2 instances of detachment and although the piece of shielding detached it remained mostly in place supported by wires that pass through that piece of shielding. The repair is accomplished by adding a bracket to fasten the piece of shielding securely to the inside of the x-ray system. Mfr reports that no systems were found to have exceeded the emission limit when checked prior to repair.
Potential presence of elevated endotoxin levels that exceed the specification limit
Cios Spin Image-Intensified Fluoroscopic X-Ray System, Model Numbers VA30-10308194
Siemens Medical Solutions USA
🏥 Medical Devices Class I - Dangerous
The unplugging of the main cable on the monitor trolley from the X10 connector can cause an unsafe electrical voltage (up to 67,6 V DC) at the X10 connector. This can result in an electrical shock if the user or other persons touch the contact pins of the X10 connector.