Kit: Central Line Dres Change 20/Cs
Medical Action Industries, Inc. 306
The ChloraPrep 3ml kit component has a shorter expiry date than the labeled kit expiry date.
95,018 total recalls in our database
Medical Action Industries, Inc. 306
The ChloraPrep 3ml kit component has a shorter expiry date than the labeled kit expiry date.
GE Healthcare
Under certain conditions, some slices may be missing which can lead to a gap of anatomy in the 3D Volume images.
Under certain conditions, some slices may be missing which can lead to a gap of anatomy in the 3D Volume images.
Stradis Medical, LLC
Firm unable to confirm that the tenaculum devices were produced in accordance with required design and manufacturing standards.
Siemens Healthcare Diagnostics
Ancillary reagent packs used on Atellica IM 1300 and Atellica IM 1600 analyzers may overflow when pierced while on an analyzer located at an altitude of greater than 350m (1148ft) above sea level. As a result, customers at these altitudes may observe an increased number of Reagent Volume Check Errors.
There was an increase in complaints related to tip breaks and wobble/vibration.
Labeled On-board instrument stability issue for current and future lots, reduced On-board Instrument Stability from 7 days to 5 days
There was an increase in complaints related to tip breaks and wobble/vibration.
Limacorporate S.p.A
There is a potential that the length of bone screws identified on labeling may not correspond to the actual length of the screw included.
Stradis Medical, LLC
Firm unable to confirm that the tenaculum devices were produced in accordance with required design and manufacturing standards.
Stradis Medical, LLC
Firm unable to confirm that the tenaculum devices were produced in accordance with required design and manufacturing standards.
VITROS Immunodiagnostic Products Anti-SARS-CoV-2 IgG Quantitative Controls Outside of Expected Control Range, potential for delayed results
Instrumentation Laboratory
Labeled On-board instrument stability issue for current and future lots, reduced On-board Instrument Stability from 7 days to 5 days
GE Healthcare
Under certain conditions, some slices may be missing which can lead to a gap of anatomy in the 3D Volume images.
There was an increase in complaints related to tip breaks and wobble/vibration.
Fort Defiance Industries
The rear heater plate and cover assembly that contains the electrical wiring for the heaters does not have sufficient bonding to ground.
Specific Pumps may exhibit intermittent performance in the AILD (Air in Line Detector) function. If an AILD does not sufficiently discern fluid from air in line, an air in line event may not be recognized by the pump and may not alarm to notify the clinician.
Smiths Medical ASD
Product may have been manufactured with an air filter assembled in an incorrect orientation.
The recalling firm was notified by the contract sterilizer that the process parameters of the sterilization cycles were not followed.
Labeled On-board instrument stability issue for current and future lots, reduced On-board Instrument Stability from 7 days to 5 days