AlignRT¿ Plus [private label-OSMS] K123371: The AlignRT Plus system is indicated for use to position and monitor patients relative to the prescribed treatment isocentre, and to withhold the beam automatically during radiation delivery.
Class I - DangerousWhat Should You Do?
- Check if you have this product: Serial Number of the device(s) distributed 248-016 248-021 248-022 248-030 248-038 248-041 248-063 248-064 249-1514 249-1516 248-071 249-0239 248-073 248-080 248-084 249-0043 249-0055 249-0056 249-0058 249-0069 249-0130 249-0137 249-1509 249-0141 249-0275 249-0152 249-0162 249-0169 249-0251 249-0253 249-0254 249-0288 249-1503 249-1512 249-1518 249-TBD 249-0061 249-0131 249-0256 249-0289 249-0290 249-TBD 248-083 249-0273 249-0276 249-1500 249-1519
- Do not eat it: Even if it looks and smells fine, do not consume this product.
- Throw it away or return it: You can return the product to the store for a full refund.
- Seek medical attention if needed: If you've consumed this product and feel unwell, contact your doctor immediately.
- Report problems: Report any issues to the FDA's Safety Reporting Portal.
⚠️ Emergency: If you experience severe symptoms after consuming this product, call 911 or Poison Control at 1-800-222-1222.
Recall Details
- Company:
- Vision RT Ltd
- Reason for Recall:
- Vision RT Ltd received three (3) reports from different sites that discovered the following issue, unintended changes were made to planned couch parameters, specifically the couch rotation parameter, during patient set-up for the Optical Surface Monitoring System [OSMS]. 1. CRM 3194, No Serious Injury, No MDR, Aware date: Dec 11, 2015 2. CRM 3321, No Patient Involved, No MDR, Aware date: Jan 19, 2016 3. CRM 4570, No Serious Injury, No MDR, Aware date: March 15, 2016 No patient harm was reported in any of these cases.
- Classification:
- Class I - Dangerous
Dangerous or defective products that predictably could cause serious health problems or death.
- Status:
- terminated
Product Information
Full Description:
AlignRT¿ Plus [private label-OSMS] K123371: The AlignRT Plus system is indicated for use to position and monitor patients relative to the prescribed treatment isocentre, and to withhold the beam automatically during radiation delivery.
Product Codes/Lot Numbers:
Serial Number of the device(s) distributed 248-016 248-021 248-022 248-030 248-038 248-041 248-063 248-064 249-1514 249-1516 248-071 249-0239 248-073 248-080 248-084 249-0043 249-0055 249-0056 249-0058 249-0069 249-0130 249-0137 249-1509 249-0141 249-0275 249-0152 249-0162 249-0169 249-0251 249-0253 249-0254 249-0288 249-1503 249-1512 249-1518 249-TBD 249-0061 249-0131 249-0256 249-0289 249-0290 249-TBD 248-083 249-0273 249-0276 249-1500 249-1519
Distribution:
Distributed in: US
Official Source
Always verify recall information with the official FDA source:
View on FDA.govFDA Recall Number: Z-2667-2016
Related Recalls
RTInterface error in the event of an I/O error between the IGC PCB and the Framegrabber PCB
Vision RT Ltd received three (3) reports from different sites that discovered the following issue, unintended changes were made to planned couch parameters, specifically the couch rotation parameter, during patient set-up for the Optical Surface Monitoring System [OSMS]. 1. CRM 3194, No Serious Injury, No MDR, Aware date: Dec 11, 2015 2. CRM 3321, No Patient Involved, No MDR, Aware date: Jan 19, 2016 3. CRM 4570, No Serious Injury, No MDR, Aware date: March 15, 2016 No patient harm was reported in any of these cases.
Potential use error when the external Gate Controller is turned ON after the Vision RT software has been opened.