3.2 mm three-fluted Radiolucent Drill Bit/Needle Point/145 mm Sterile Product Usage: The 3.2 mm Three-fluted Drill Bits are instruments that can be used with the following systems: Expert Lateral Femoral Nail (part number 03.010.060S only), Expert Tibial Nail, Expert Humeral Nailing, Multiloc Humeral Nailing System, Suprapatellar Instrumentation for Expert Tibial Nail, and Adolescent Lateral Femoral Nails (ALFN).
Class I - DangerousWhat Should You Do?
- Check if you have this product: Catalog ID 03.010.100S Lot # 5525872, 6153368, 6530901, 5548707, 6197315, 6581051 5575918, 6199232, 6676406, 5603463, 6231850, 6721724 5649117, 6256560, 6734876, 5668880, 6305842, 6808463 5724639, 6319050, 6831468, 5742276, 6320150, 6997294 5807341, 6343980, 7039877, 6012770, 6401819, 7052565 6045597, 6448707, 7081479, 6057914, 6472100, 7378832 6108342, 6501856, 7410311, 6142443, 6503351, 7466207 7554670, 7620971, 7675571, 7711694, 7801251, 7918026 9815103, 9828932, 9905850, 9939769, H033348
- Do not eat it: Even if it looks and smells fine, do not consume this product.
- Throw it away or return it: You can return the product to the store for a full refund.
- Seek medical attention if needed: If you've consumed this product and feel unwell, contact your doctor immediately.
- Report problems: Report any issues to the FDA's Safety Reporting Portal.
⚠️ Emergency: If you experience severe symptoms after consuming this product, call 911 or Poison Control at 1-800-222-1222.
Recall Details
- Company:
- Synthes (USA) Products LLC
- Reason for Recall:
- The sterile packaging may be compromised. A protective cap is to be secured on the tip of the drill bit. If the protective cap is not secured, the drill bit may puncture the sterile barrier.
- Classification:
- Class I - Dangerous
Dangerous or defective products that predictably could cause serious health problems or death.
- Status:
- terminated
Product Information
Full Description:
3.2 mm three-fluted Radiolucent Drill Bit/Needle Point/145 mm Sterile Product Usage: The 3.2 mm Three-fluted Drill Bits are instruments that can be used with the following systems: Expert Lateral Femoral Nail (part number 03.010.060S only), Expert Tibial Nail, Expert Humeral Nailing, Multiloc Humeral Nailing System, Suprapatellar Instrumentation for Expert Tibial Nail, and Adolescent Lateral Femoral Nails (ALFN).
Product Codes/Lot Numbers:
Catalog ID 03.010.100S Lot # 5525872, 6153368, 6530901, 5548707, 6197315, 6581051 5575918, 6199232, 6676406, 5603463, 6231850, 6721724 5649117, 6256560, 6734876, 5668880, 6305842, 6808463 5724639, 6319050, 6831468, 5742276, 6320150, 6997294 5807341, 6343980, 7039877, 6012770, 6401819, 7052565 6045597, 6448707, 7081479, 6057914, 6472100, 7378832 6108342, 6501856, 7410311, 6142443, 6503351, 7466207 7554670, 7620971, 7675571, 7711694, 7801251, 7918026 9815103, 9828932, 9905850, 9939769, H033348
Official Source
Always verify recall information with the official FDA source:
View on FDA.govFDA Recall Number: Z-1710-2016
Related Recalls
LOW PROF LCKNG SCREW, F/IM NAIL 5.0MM / L, 46MM / XL25/ STER. Product Code: 04.045.346TS. Used in RFN-ADVANCEDTM Retrograde Femoral Nailing (RFNA) System and the Tibial Nail Advanced System.
Synthes (USA) Products
Although the etched length on the screw is correct, the length marked on the external packaging is incorrect. Specifically, 42mm screws were packaged and labeled as 46mm, while 46mm screws were packaged and labeled as 42mm.
LOW PROF LCKNG SCREW, F/IM NAIL 5.0MM / L, 42MM / XL25/ STER. Product Code: 04.045.342TS. Used in RFN-ADVANCEDTM Retrograde Femoral Nailing (RFNA) System and the Tibial Nail Advanced System.
Synthes (USA) Products
Although the etched length on the screw is correct, the length marked on the external packaging is incorrect. Specifically, 42mm screws were packaged and labeled as 46mm, while 46mm screws were packaged and labeled as 42mm.
STARDRIVE SCRWDRVR SHFT/T4 50MM/SELF-RETAINING/HXC-Intended for tightening, loosening, or removing of screw implants during orthopaedic surgery. Part Number: 03.130.010
Synthes (USA) Products
Stardrive Screwdrivers manufactured without a 5-degree relief cut around the tip and will not engage with their respective 1.3mm and 1.5mm screws, may result in surgical delay