Medtronic Everest 20cc Inflation Device; Model Number and Catalog Number: AC2205P The Everest 20cc Inflation device is designed to be used to inflate / deflate balloon catheters as well as to monitor pressure within the balloon. The Everest 20atm Device is outfitted with a manometer with measuring pressures ranging from vacuum to 20bars in 0.5 bar increments. The Everest 30atm Device is outfitted with a manometer with measuring pressures ranging from vacuum to 30bars in 0.5 bar increments. The manometers are accurate to within +/- 3% of the gauges full scale. The device is a sterile, single use device and is not implanted; it also does not come in direct contact with the patient. This product is packaged in an inner and outer Tyvek /poly layer pouch.
Class I - DangerousWhat Should You Do?
- Check if you have this product: Lot Number: 50755851
- Do not eat it: Even if it looks and smells fine, do not consume this product.
- Throw it away or return it: You can return the product to the store for a full refund.
- Seek medical attention if needed: If you've consumed this product and feel unwell, contact your doctor immediately.
- Report problems: Report any issues to the FDA's Safety Reporting Portal.
⚠️ Emergency: If you experience severe symptoms after consuming this product, call 911 or Poison Control at 1-800-222-1222.
Recall Details
- Company:
- Medtronic Vascular
- Reason for Recall:
- Incorrect master label.
- Classification:
- Class I - Dangerous
Dangerous or defective products that predictably could cause serious health problems or death.
- Status:
- terminated
Product Information
Full Description:
Medtronic Everest 20cc Inflation Device; Model Number and Catalog Number: AC2205P The Everest 20cc Inflation device is designed to be used to inflate / deflate balloon catheters as well as to monitor pressure within the balloon. The Everest 20atm Device is outfitted with a manometer with measuring pressures ranging from vacuum to 20bars in 0.5 bar increments. The Everest 30atm Device is outfitted with a manometer with measuring pressures ranging from vacuum to 30bars in 0.5 bar increments. The manometers are accurate to within +/- 3% of the gauges full scale. The device is a sterile, single use device and is not implanted; it also does not come in direct contact with the patient. This product is packaged in an inner and outer Tyvek /poly layer pouch.
Product Codes/Lot Numbers:
Lot Number: 50755851
Official Source
Always verify recall information with the official FDA source:
View on FDA.govFDA Recall Number: Z-1121-2014
Related Recalls
Medtronic IN.PACT AV, Paclitaxel-coated PTA Balloon Catheter, REF: IAV06008008P, Sterile EO, Rx Only
Medtronic Vascular
Packaging for Balloon Catheters may be damaged resulting in loss of sterility.
Packaging for Balloon Catheters may be damaged resulting in loss of sterility.
Stent Graft Systems built with specific batches of taper tip assemblies have the potential for the taper tip to detach from the delivery system. Detachment of the taper tip during the implant procedure may lead to a secondary intervention to attempt to remove the taper tip, either by endovascular retrieval or surgical conversion. There is also potential that the taper tip is intentionally left behind in the patient, at the physician's discretion, if not easily removable.