Honeywell smoke detectors
Class I - DangerousWhat Should You Do?
- Check if you have this product: See description
- Do not eat it: Even if it looks and smells fine, do not consume this product.
- Throw it away or return it: You can return the product to the store for a full refund.
- Seek medical attention if needed: If you've consumed this product and feel unwell, contact your doctor immediately.
- Report problems: Report any issues to the FDA's Safety Reporting Portal.
⚠️ Emergency: If you experience severe symptoms after consuming this product, call 911 or Poison Control at 1-800-222-1222.
Recall Details
- Company:
- Honeywell
- Reason for Recall:
- Fire & Fire-Related Burn
- Classification:
- Class I - Dangerous
Dangerous or defective products that predictably could cause serious health problems or death.
- Status:
- ongoing
- Hazard:
- Fire & Fire-Related Burn
Product Information
Full Description:
Smoke Detectors Recalled By Honeywell NEWS from CPSC U.S. Consumer Product Safety Commission Office of Information and Public Affairs Washington, DC 20207 FOR IMMEDIATE RELEASE May 24, 1983 Release # 83-029 Honeywell To Recall Certain Battery-Operated Smoke Detectors WASHINGTON, D.C. -- In cooperation with the U.S. Consumer Product Safety Commission, Honeywell Inc., Minneapolis, Minnesota, today announced a voluntary recall affecting over 770,000 model TC89B and TC89C battery-operated smoke detectors that may not work when smoke is present. Honeywell learned that, because of circuit board mounting problems, some smoke detectors will not sound an alarm when smoke is present, but may alarm when the test button is pushed. Honeywell is asking consumers to return any detectors that have this defect for a replacement. Since Honeywell no longer makes residential smoke detectors, the firm will replace returned units with a comparable model produced by another manufacturer. Honeywell produced the affected detectors in 1977 and 1978. These models, which were sold nationally and in Canada, carry the model number TC89B and TC89C and have a date code between 7601 and 7820. The model numbers and date codes are found under the smoke detector cover, inside the detector on a piece of gray cardboard. To identify affected detectors, consumers should remove the cover from the detector. If the first five characters of the identification number contained on the piece of gray cardboard are TC89B or TC89C, and the date code is ANY NUMBER FROM 7601 THROUGH 7820, the detector should be carefully checked for proper operation in accordance with the instructions below. This action does not apply to Honeywell smoke detectors with date codes of 7821 or higher. Honeywell recommends that consumers check the battery and then carefully check to determine if the smoke detector is working properly by using an extinguished candle to create smoke near the detector. Consumers should cease to use broom handles or similar objects to push the test button on Honeywell smoke detectors. If the detector does not alarm with the presence of smoke, consumers should contact Honeywell on its toll-free number 800-328-8194 or write Honeywell Consumer Affairs, 10400 Yellow Circle Drive, Minnetonka, Minn. 55343. to see if your detector is covered by the recall. Because smoke detectors are important warning devices, Honeywell and the Commission urge consumers to replace non-working smoke detectors with new ones immediately. Both Honeywell and the Consumer Product Safety Commission strongly recommend the use of smoke detectors and further recommend that consumers regularly check smoke detectors, regardless of brand, to ensure proper operation. Consumers wishing further information may call the CPSC toll free Hotline at 800-638-CPSC, A teletypewriter number for the hearing impaired is (301) 595-7054. The Consumer Product Safety Commission recently announced the recall of certain Honeywell smoke detectors. The model number (TC89B or TC89C) and date code ( 7601 to 7820) are found under the smoke detector cover, inside the detector on gray cardboard (see illustration above). Consumers should call Honeywell on 800-328-8194 for further information.
Product Codes/Lot Numbers:
See description
Official Source
Always verify recall information with the official CPSC source:
View on CPSC.govCPSC Recall Number: 83029
Related Recalls
CGMP Deviations
Honeywell-V5130 Gas Valve Announcing Issuance Of Complaint NEWS from CPSC U.S. Consumer Product Safety Commission Office of Information and Public Affairs Washington, DC 20207 FOR IMMEDIATE RELEASE April 24, 1984 Release # 84-027 Honeywell-V5130 Gas Valve Announcing Issuance Of Complaint Washington, D.C.-- The U.S. Consumer Product Safety Commission announces that its staff has issued an administrative complaint against Honeywell, Inc., of Minneapolis, Minn., which alleges that Honeywell's V5130 gas combination control valves contain a defect which, when used with LP gas water heaters, presents a substantial risk of injury to the public from fires and explosions. The Commission has learned of approximately 64 explosion incidents involving this control valve-- including 16 deaths and approximately 35 incidents of personal injury to consumers. The complaint is limited to valves used in water heaters fueled by LP gas. Since LP gas is heavier than air, it does not vent easily and, in the case of a leak, tends to settle toward the floor, accumulate there, and may lead to an explosion when touched off by a nearby ignition source. The combination valve serves the dual purpose of regulating the gas supplied to the water heater and the safety function of shutting off the gas supply when the pilot light becomes extinguished. The complaint alleges that the design of the valve knob, which utilizes plastic lugs keyed into the metal slots of the gas cock, is defective. It maintains that V5130 controls which were made between 1958 and 1976, have knobs that can be easily worn and broken such that the knob can become reversed (rotated 180°) with respect to the gas cock. Should this happen, the knob could become stuck in the depressed position and defeat the pilot-flame safety system. Thereafter, if the pilot flame should go out, the water cools, the thermostat calls for heat, and the control valve opens to heat the water. As a result, substantial quantities of unburned gas will be released through the pilot and main burners and create a serious explosion and/or fire hazard. This control was used on various water heaters manufactured by numerous different manufacturers. Some of the controls are identifiable by the Honeywell name on the front faceplate. Others may only have the name of the water heater manufacturer. The consumer may need to consult his LP gas supplier or a qualified plumber to get positive identification of the valve. Persons who become aware of explosion or fire incidents that may be associated with this product should contact the CPSC on its toll-free Hotline 800-638-CPSC. Information regarding this matter may also be obtained by calling the CPSC toll-free Hotline. The teletypewriter number for the hearing impaired is (301) 595-7054.
Explosion/Projectiles