Medical Devices Recalls

There is a potential for a decrease in calibration ODs for Bicarbonate reagent which could result in calibration failures and/or quality control failures.

Glued connections of the breathing circuit can become loose before or during ventilation resulting in partial or complete detachment of pieces.

Glued connections of the breathing circuit can become loose before or during ventilation resulting in partial or complete detachment of pieces.

Philips has identified a compliance issue where ProxiDiagnost N90 R.1.0, CombiDiagnost R90 R.1.0 and CombiDiagnost R90 R1.1 systems are missing a certification label required by the Food and Drug Administration (FDA).

If the batteries are installed incorrectly, the product may overheat, possibly leading to pain, discomfort, irritation, or even burns during use of the device.

Due to a manufacturing defect from the battery supplier, affected batteries may experience a loss of capacity earlier in the battery lifecycle than expected and overall battery runtime may decrease earlier in the battery lifecycle than expected.

Due to a manufacturing issue that may result in filter leakage.

Multi-Function Foot Switch Unload Pedal Foot Entrapment-Pressing the Unload Pedal of the foot switch to perform the unload function may cause entrapment of the operator's foot and injury

DuraLife devices instructions for cleaning and sterilization have been determined to be inadequate. Specifically, for the DuraLife product, the IFU does not provide the cleaning method, duration of autoclave cycle or specify the number of cycles the product can be reused on a single patient.

Glued connections of the breathing circuit can become loose before or during ventilation resulting in partial or complete detachment of pieces.

Glued connections of the breathing circuit can become loose before or during ventilation resulting in partial or complete detachment of pieces.

Glued connections of the breathing circuit can become loose before or during ventilation resulting in partial or complete detachment of pieces.

Mis-labeled length of the dental implant on the Recall Implant's package. Dental implant size D5.0 x L8.5mm, labeled as D5.0 x L10mm

Glued connections of the breathing circuit can become loose before or during ventilation resulting in partial or complete detachment of pieces.

Glued connections of the breathing circuit can become loose before or during ventilation resulting in partial or complete detachment of pieces.

Glued connections of the breathing circuit can become loose before or during ventilation resulting in partial or complete detachment of pieces.

In the remote occurrence in which the electrical contactor component present in the drying chambers of the Reliance Vision Multi-Chamber Washer/Disinfector malfunctions, the heating elements in the drying chamber could overheat, eventually resulting in smoke and/or fire.

Pressing the Unload Pedal of the foot switch to perform the unload function may cause entrapment of the operators foot. If foot or leg entrapment occurs while pressing Unload Pedal, the risk to operators may include: pain, muscle or ligament sprain, abrasion, laceration, contusion, fracture, loss of function, and joint dislocation.

Glued connections of the breathing circuit can become loose before or during ventilation resulting in partial or complete detachment of pieces.

Multi-Function Foot Switch Unload Pedal Foot Entrapment-Pressing the Unload Pedal of the foot switch to perform the unload function may cause entrapment of the operator's foot and injury