Biograph mCT S(64)-4R, Model Number 10248672
Siemens Medical Solutions USA
Emission computed tomography systems and computed tomography xray systems with optional ceiling mounts may be missing a locking ring.
Medical equipment, implants, and diagnostic devices
Siemens Medical Solutions USA
Emission computed tomography systems and computed tomography xray systems with optional ceiling mounts may be missing a locking ring.
Inner pouches incorrectly labeled as part 8136, 36Fr Right Angled Thermosensitive PVC catheter, but are part 15236-36Fr Right Angled Firm PVC Catheter
Olympus Scientific Solutions Americas
Higher than published scatter around the probe head when testing some samples. At the point the customer would interact directly with the instrument (Trigger position), most readings were lower. However, measurements around the probe head were higher particularly on samples know to be highly scattering (plastics, soils) with minimal increases on high density samples (steel, aluminum).
Siemens Medical Solutions USA
Emission computed tomography systems and computed tomography xray systems with optional ceiling mounts may be missing a locking ring.
The affected S2 fluid packs may generate a transponder error when the fluid pack is loaded on to the cobas b 221 system. The error prevents the fluid from being recognized by the system and the instrument cannot start measurements until the affected S2 Fluid Pack is replaced.
Siemens Medical Solutions USA
Emission computed tomography systems and computed tomography xray systems with optional ceiling mounts may be missing a locking ring.
Siemens Medical Solutions USA
Emission computed tomography systems and computed tomography xray systems with optional ceiling mounts may be missing a locking ring.
The adhesive between the sphere assembly and the biopsy needle shaft may be compromised, causing the sphere assembly to move on the needle shaft. This may result in inaccurate navigation and improper placement of the needles biopsy window in the brain.
Reports of catheter tip splits and or separation. Loss of device function, medical intervention to retrieve separated segment, or complications resulting from separated tip occluding blood flow to end organs may result.
The inside of the folded Instructions For Use (IFU) pamphlet was missing the usage instructions and warnings.
Titan Spine is recalling specific Endoskeleton TCS Integrated Locking Bone Screw Assembly due to the locking bone screw collars not 'locking'.
The possibility exists for a large amount of liquid to seep through the top cover of the table and penetrate the components inside the table. If this occurs, table movements may no longer be possible. No injuries reported.
The Anspach Effort
Saw head separated from the drive unit or began to come loose.
Siemens Medical Solutions USA
Emission computed tomography systems and computed tomography xray systems with optional ceiling mounts may be missing a locking ring.
A system freeze-up of the Merge Hemo system, that included the PHASEIN End Tidal CO2 unit, resulted in the user needing to move the patient to another cath lab.
The adhesive between the sphere assembly and the biopsy needle shaft may be compromised, causing the sphere assembly to move on the needle shaft. This may result in inaccurate navigation and improper placement of the needles biopsy window in the brain.
A gradient cable in the ACGD cabinet may be missing a spacer that prevents connecting the gradient cable terminals in the wrong polarity on X gradient amplifier. This could cause images to be flipped left-right with incorrect orientation annotation.
When using the CIVCO biopsy attachments in combination with the ACUSON S Family on-screen guidelines, the biopsy needle may traverse outside the on-screen guidelines.
Siemens Medical Solutions USA
Emission computed tomography systems and computed tomography xray systems with optional ceiling mounts may be missing a locking ring.
The inside of the folded Instructions For Use (IFU) pamphlet was missing the usage instructions and warnings.