Black & Decker Battery Powered Lawn Mower
Black & Decker
Fire & Fire-Related Burn
Household items, electronics, toys, and furniture
Black & Decker
Fire & Fire-Related Burn
Far East International
Choking
Explosion/Projectiles
B & D Molded Products
Plastic Table Lamps Warning NEWS from CPSC U.S. Consumer Product Safety Commission Office of Information and Public Affairs Washington, DC 20207 FOR IMMEDIATE RELEASE December 3, 1981 Release # 81-029 Consumers Warned That Four Million Plastic Lamps May Pose Electrocution Hazard WASHINGTON, D.C. ( Dec. 3 ) -- Three firms today alerted consumers that approximately four million plastic table lamps if misused or carelessly handled may pose a risk of eIectrocution or electrical shock. The warning was issued voluntarily in cooperation with the U.S. Consumer Product Safety Commission by A-Bee Syndicate, Inc., of New York, New York; B & D Molded Products, Inc., of Shelton, Connecticut; and Injection Corporation, of Plainfield, New Jersey. CPSC staff has identified these companies as manufacturers and distributors of the lamps according to definitions in the Consumer Product Safety Act. According to the firms, the lamps were designed and manufactured in conformity with existing industry practices. They could, however, pose a potential safety hazard if the lightbulb socket is dislodged or removed from the lamp base, thereby exposing two electrical terminals positioned on either side of the socket. The lamps consist of a black plastic base with three legs which supports a plastic shade covered with bubble-like protrusions. The shades were produced in three colors: white, lime-green and neon-orange. The lamps stand approximately 16 inches tall, and some were made with the name "A-Bee" on the smooth collar at the base of the shade. The lamps were sold nationwide for approximately $1 each in variety retail stores from 1965 through 1975, although the majority were distributed in the eastern half of the U.S. Some lamps may have been given away as promotional items. Consumers who own one of the lamps should take the following steps to determine if there is a safety hazard: Unplug the lamp; Remove the shade and turn the lamp upside down; Throw the lamp away if the bulb socket falls out of the base or is loose enough to expose the electrical terminals. Anyone requiring additional information about this warning should contact CPSC's toll-free Hotline at 800-638-2772. Warning Certain of the pictured table lamps may contain a potential electrocution or shock hazard. Each lamp consists of a black, plastic three-legged base supporting a plastic shade covered with bubble-like protrusions. The shades are available in white, neon-orange, and lime-green. The lamps were distributed from 1965 through April 1975 and sold for approximately $1.00. The lamps may often be identified through the name "A-BEE" which may be visible on the smooth collar on the base of the lamp's shade. If the lamp is titled or tipped, the bulb socket may dislodge from the lamp's base, thereby exposing two copper electrical terminals. Consumers should check to see if their lamp is one affected by talking the following steps: Unplug the Lamp Remove the shade from the lamp's base Turn the lamp upside down If a bulb socket works itself loose or falls out exposing the electrical terminals, the lamp should not be used. In certain of the affected table lamps, the bulb socket may not be securely fastened to the lamp's base or may have been able to work itself loose from the lamp's base. Consumers owning one of the affected lamps are warned to immediately stop use of the lamp and remove it form children's access.
Baby Line Furniture
Suffocation
Questor
Fall
Fall
Fire & Fire-Related Burn
McCulloch
Electrocution/Electric Shock
Fire & Fire-Related Burn
HOME Division of Lear Siegler
Carbon Monoxide (CO)
CA VA
Fire & Fire-Related Burn
Electrocution/Electric Shock
Robertshaw Controls
LP Gas Water Heater Controls Warning/Correction NEWS from CPSC U.S. Consumer Product Safety Commission Office of Information and Public Affairs Washington, DC 20207 FOR IMMEDIATE RELEASE January 29, 1981 Release # 81-005 Robertshaw Company Issues New Warning On Explosion Hazard In 1,000 LP Gas Water Heater Controls WASHINGTON, D.C. (January 29, 1981) -- The manufacturer of "Unitrol" fuel control mechanisms used on certain liquid propane gas water heaters is renewing its efforts to publicize and correct a potential defect which may cause severe burn injuries and death resulting from explosion and fires. Since 1954, when the fuel controls first were sold to hot water heater manufacturers, there have been at least 48 deaths and 89 severe burn injuries from explosions of water heaters equipped with these gas controls. The program to replace the old gas controls with new ones is being conducted by the Robertshaw Controls Company of Richmond, Va., in cooperation with the U.S. Consumer Product Safety Commission. The manufacturer also is reissuing a national alert to warn consumers of the severe risk posed by continued use of water heaters equipped with the controls. The warning covers the "Unitrol" model 110 and model 200 gas controls used to regulate the flow of LP (liquid propane) gas to water heaters. These controls, manufactured about 25 years ago by Robertshaw's Grayson Controls division, of Long Beach, California, contain a potentially defective valve which could cause a gas leak and subsequent explosion and fire. Approximately 1,000 of the potentially defective controls still are believed to be in use nationwide. Many of these controls may be found on water heaters located in rural areas, such as in farm homes, in vacation or weekend homes, or in hunting or fishing camps. (LP gas commonly is used to fuel appliances in rural areas due to the unavailability of natural gas lines.) The potentially defective controls were sold to approximately 110 water heater manufacturers from December, 1954, through February, 1957. The controls include Unitrol models 110 and 200 showing any date code which includes the letters W or X, or the letter combinations LV, AY, BY or CY. Consumers can identify the affected units by looking for "Unitrol 110" on the face of the control, or for "Unitrol 200" on the temperature dial on the front of the control. The controls are located near the bottom of the water heater. Date codes are stamped next to the gas pilot outlet which is located on the bottom side of the control and to the right. Use of a small mirror will aid consumers in reading the date code more easily. In 1974, Robertshaw notified CPSC of the potential defect in the gas controls, and subsequently instituted a program to repair the devices. Consumers who own LP gas water heaters should check the heater control to determine if a Unitrol model 110 or 200 with a date code mentioned above has been used. If so, consumers then should contact Robertshaw at its toll-free number 800-421-1130. In California call 800-262-1173. Following a free inspection, the firm will install new controls if appropriate. Anyone wishing to verify the model numbers or the brand name should contact CPSC's toll-free Hotline at 800-638-2772.
Kawasaki
Laceration
Explosion/Projectiles
Atlanta Novelty
Choking; Laceration
Choking; Laceration
Playskool
Choking
Regal Ware
Electrocution/Electric Shock