Household items, electronics, toys, and furniture
Unknown Manufacturer
The front suspension arm ball joints could have been contaminated during production, resulting in rapid wear of one or more of the ball joints and possible ball joint separation. If the ball joint separation occurs while riding, the operator could lose control of the ATV.
Gamewell-FCI, of Northford, Conn.
Incoming and outgoing messages to and from the control board can interfere with each other, preventing it from sending a message to the command center in the event of fire.
Unknown Manufacturer
The power cord is not polarized and is undersized. The power cord is not correctly secured and there is no strain relief on the switch housing. Additionally, the switch housing is not flame-retardant. As a result of these issues, the lamps pose shock and fire hazards.
Old Williamsburgh Candle Corp., of Brooklyn, N.Y.
The wick can move from the center of the jar to the side, causing the glass to overheat and possibly crack or shatter. Exposure to broken glass and molten wax poses laceration and burn hazards to consumers.
Flojet Division of ITT Corp., of Santa Ana, Calif.
A manufacturing defect can cause consumers to receive an electric shock when the metal housing is touched.
Unknown Manufacturer
The trunk has an exterior clasp that can lock unexpectedly when the trunk lid closes. If a child climbs inside the trunk, he/she may not be able to open the trunk from the inside. This poses an entrapment and suffocation hazard to children.
Unknown Manufacturer
The tea light candles have a clear, plastic shell that can melt or ignite, posing a fire or burn hazard to consumers.
TAC LLC, of Loves Park, Ill. (formerly Invensys Building Systems)
These boiler controls can fail, causing water temperature to rise to the high temperature limit. Should the high temperature thermostat or external safety limit devices also fail, consumers could suffer scalds from unexpectedly hot water during use or system piping damage can result.
Unknown Manufacturer
These electric hair dryers are not equipped with an immersion protection plug to prevent electrocution if the hair dryer falls into water. Electric shock protection devices are required by industry standards for all electric hand-held hair dryers. If the hair dryer falls into water during use and is not equipped with this safety device, it can pose a shock and/or an electrocution hazard to consumers.
Unknown Manufacturer
Electrical arcing in the fan's wiring can cause a fire hazard.
Unknown Manufacturer
On the recalled ATVs, the handlebar base mounting bolts, tie-rod ends and tie-rod adjustment locking nuts may not have been tightened to the proper torque during the production process. Operating an affected ATV could cause components to loosen, resulting in loss of steering control. This condition could result in loss of vehicle control, which could result in injury or death.
Unknown Manufacturer
A water leak inside the water cooler can create an electrical arc, posing a fire hazard.
Artcraft and Foremost Inc., of Moorestown, N.J.
The impact of being dropped or banged can cause the cup to break into pieces, resulting in sharp or jagged edges that pose a laceration hazard to children.
Weil-McLain Co., of Michigan City, Ind.
The boiler assembly is not properly sealed. Exhaust and carbon monoxide (CO) can leak during operation and accumulate, posing a risk of poisoning.
Unknown Manufacturer
Tiny magnets inside the building pieces can fall out. Magnets found by young children can be swallowed or aspirated. If more than one magnet is swallowed, the magnets can attract each other and cause intestinal perforation or blockage, which can be fatal.
Graco Children's Products Inc., of Exton, Pa.
The highchair can collapse if it is not fully opened and locked into place from the storage position prior to use. If the highchair collapses, a child occupying the highchair can be injured.
Target, of Minneapolis, Minn.
Small parts on the plush rattles and frame ornaments can break or detach, posing a choking hazard to young children. Additionally, the rattles' plastic ring can break and expose sharp points.
Unknown Manufacturer
The pendant on the necklace contains high levels of lead. Lead is toxic if ingested by young children and can cause adverse health effects.
Unknown Manufacturer
The flexible plastic ring that holds the teether beads in place can crack or break, and the beads can detach, posing a choking hazard to infants.
Unknown Manufacturer
The product can crack, break or shatter when used with the tea light candles that accompany them, yielding sharp pieces of glass that pose a laceration hazard.