The coolant overflow container on the recalled mowers can become over-pressurized and cause hot coolant to spray on the operator. This poses a burn hazard to consumers.
A short may occur while in use due to an incorrect bridge installed in the product, to which the meter clips are attached. If the manufacturing defect exists, all metal parts of the meter could create a shock or burns can occur if the cover is off and the meter socket is energized.
The throttle on the recalled motorcycles can become stuck in the open position or become disconnected. In the "Easy" or the "0-25" mode, this can unexpectedly lead to full power when turning on the power, resulting in a loss of control and serious injury to the rider.
The surface paint on the balancing toys and zippers of the purses and pen cases contain excessive levels of lead, violating the federal lead paint ban. The inflatable baseball bat toys contain excessive levels of DEHP, violating the federal phthalate standard
The over pressure valves (OPVs) in the diving equipment could fail allowing the buoyancy compensator devices (BCDs) and the diver lift inflatable devices to leak, posing a drowning hazard to divers.
An incorrectly sized differential was installed in the tractor transaxle affecting the engagement of the differential lock and causing the tractor to turn to the left when braking. This causes the vehicle to veer left when the brake is applied, posing a risk of collision and injury to the operator and bystanders.
The flame guards on the recalled replacement torch fuel containers can malfunction and cause the containers to melt while the torch is in use, posing a fire hazard to consumers.