VITEK 2 AST-N351 Test Kit
bioMerieux
False Positive ESBL Phenotype
🏥 Medical Devices • 6,554 recalls
bioMerieux
False Positive ESBL Phenotype
Negative bias results when using VITROS VALP Reagent, GEN 25.
A software update is being issued to correct multiple issues identified in the previous software version.
On lot of VERIGENE(R) BC-GP Utility Kits (20-011-018) were labeled with the VERIGENE(R) Amplification Tray label.
When switching back & forth between multiple UV instances in the Windows taskbar, the patient images displayed on the mammo high resolution monitors may not show images of the patient selected on UV, which could result in an incorrect diagnosis.
For surview scan length more than 500mm,if the user aborts or skips the reconstructed surview, the image may have the wrong field of view (FOV). When user plans and performs subsequent clinical scan with the wrong FOV the actual start and end position may not be consistent with the planned positons.
Potential for abnormally high INR test results with the CoaguChek XS PT Test Strips for customers who purchased products directly from Terrific Care LLC dba MedEx Supply via website/telephone/facsimile.
A customer site was identified to have three FACSLyric IVD systems with FACSuite clinical v1.1.1 installed on a computer workstation with windows 10 operating system (OS). Windows 10 OS is not a released configuration for clinical use. It is released for research use only.
These Swan Ganz catheters have incorrect lumen assembly, which causes reversal of the lumens. If the lumens are reversed the clinician may note reverse PA and CVP pressure values and waveforms.
Multiple Issues Identified in Atellica Solution System Software in V 1.14.2 and lower in: Atellica¿ IM 1300 Analyzer Atellica¿ IM 1600 Analyzer;Atellica¿ CH 930 Analyzer; Atellica¿ Sample Handler Prime
Increased temperature in the probe-head surface with LOGIQ P6 Model BT07 and BT09 scanners when used in specific types of scans and with specific probes.
Multiple Issues Identified in Atellica Solution System Software in V 1.14.2 and lower in: Atellica¿ IM 1300 Analyzer Atellica¿ IM 1600 Analyzer;Atellica¿ CH 930 Analyzer; Atellica¿ Sample Handler Prime
These Swan Ganz catheters have incorrect lumen assembly, which causes reversal of the lumens. If the lumens are reversed the clinician may note reverse PA and CVP pressure values and waveforms.
Abbott has identified an issue with the Alinity i Gear Pump Assembly (part number A 30108552 01) resulting in foaming/bubbling out of the bottle reservoir for Concentrated Wash Buffer and an unexpected amount of dried residue of buffer. The foaming/bubbling is a result of an improper calibration of the pump s operating speed.
These Swan Ganz catheters have incorrect lumen assembly, which causes reversal of the lumens. If the lumens are reversed the clinician may note reverse PA and CVP pressure values and waveforms.
Multiple Issues Identified in Atellica Solution System Software in V 1.14.2 and lower in: Atellica¿ IM 1300 Analyzer Atellica¿ IM 1600 Analyzer;Atellica¿ CH 930 Analyzer; Atellica¿ Sample Handler Prime
These Swan Ganz catheters have incorrect lumen assembly, which causes reversal of the lumens. If the lumens are reversed the clinician may note reverse PA and CVP pressure values and waveforms.
Multiple Issues Identified in Atellica Solution System Software in V 1.14.2 and lower in: Atellica¿ IM 1300 Analyzer Atellica¿ IM 1600 Analyzer;Atellica¿ CH 930 Analyzer; Atellica¿ Sample Handler Prime
Potential for erroneous result messages for the Anti-HAV IgM assay when run on the cobas e 602 module. Discrepant result reporting may result.
Stryker Sustainability Solutions
Stryker s Sustainability Solutions division (SSS) has received an increase in reports indicating that an EEPROM chip error code may occur when Reprocessed 2515 NAV eco Variable Electrophysiology (EP) Catheters are used with CARTO(R) EP Navigation Systems.